36 press releases : Ship operation : Water, Ballast, Waste...
|
Date 2009-07-30 |
|
|
|
|
|
The Multicrusher is an effective, widly applicable macerating unit. The independently working Twin Shaft Grinder is based on the proven desing of the Börger Rotary Lobe Pump.
Instead of rotating lobes there are blade and cutter configuartions installed in the Multicrusher. The relative rotation speed of the two shafts ensures an optimalized macerating effect and pre-
vents stringy material from...
|
|
|
Date 2009-07-09 |
|
|
|
|
|
Leif Höegh & Co has strong faith in the OceanSaver® Ballast Water Treatment System and has already signed a contract for 10 deliveries. The contracts have a total value of NOK ~50 million, just over $8 million.
The plan is to deliver the OceanSaver® system for newbuildings in Korea and Vietnam, but the contract also opens for installation on existing ships in the fleet. Höegh is thus the first ...
|
|
|
Date 2009-07-03 |
|
|
|
|
|
• Exceptionally clean water (below 5 ppm)
• No chemicals
• Almost no maintenance
• Discharge with peace of mind anywhere in the world
• Capacity range from 1-10 m3 per hour
• Certified by Lloyd’s Register
The DMA Sorp 5000 purifies oil contaminated water to an effluent oil concentration no more than 5 ppm irrespective of the oil content of the influent (from 0-100 ppm).
The system is mai...
|
|
|
Date 2009-07-01 |
|
|
|
|
|
NOx exhaust gas treatment catalysts convert pollutants into substances which are environmentally benign (e.g. water vapor, nitrogen).
At our manufacturing facility in Germany, which also produces our NOx plate and oxidation catalysts, we fabricate honeycomb catalysts for NOx removal.
These catalysts operate with a high cleaning efficiency and reliably reduce the concentration of nitrogen oxi...
|
|
|
Date 2009-06-25 |
|
|
|
|
|
The pulse length dimmer AHD 601 is used for dimming of lamps and LEDs that are operated with a dc-current of 8 to 35VDC with 240W.
The permissible permanent current at 24V-power supply is therefore 10A. For a short time, a load of 18A is permitted. The device is also appropriate for roomillumination, e.g. on yachts.
Construction/Function
AHD 601 consists of an electronic unit with a processor...
|
|
|
Date 2009-06-04 |
|
|
|
|
|
The ACO Maripur system purifies water by biological wastewater treatment combined with submerged negative pressure micro-filtration membrane technology to filter out activated sludge, bacteria and viruses.
With no need for any final purification, ACO Maripur technology purifies water in compliance with numerous quality standards: IMO/MARPOL, HELCOM, German Federal Law Gazette No. II, Page 1378 ...
|
|
|
Date 2009-06-02 |
|
|
|
|
|
Surveyor™ Cargo Level is a complete automatic level gauging and cargo monitoring system for tankers. The system is one of the most comprehensive and accurate systems available for this specific application. Together with advanced signal handling and computer technology, the functions included are as follows:
Level gauging in cargo, slop, ballast, and fuel oil tanks
Density measurement in carg...
|
|
|
Date 2009-06-02 |
|
|
|
|
|
The Fox-Pac is designed primarily for marine vessels and fixed platforms that hâve limited space and weight capacity for a sewage process System.
The Fox-Pac is smaller and less costly than our standard marine units. In order to produce this scaled down version, rétention time was reduced and the gravity séparation process was combined with a high-rate biological aérobic filtration process with ...
|
|
|
Date 2009-05-05 |
|
|
|
|
|
In the Bio sludge Treatment System all sludge from waste water and food waste is processed. The system is tailor made to secure the interface between liquid and solid sludge before final incineration.
The main target for the bio sludge treatment system is to reduce volume by dewatering, drying and to disinfect. Sludge from waste water and food waste represents a large volume that needs further ...
|
|
|
Date 2009-05-05 |
|
|
|
|
|
Designed with the mariner in mind, the Village Marine Tec. Oily Water Separator (OWS) combines simplicity and reliability to produce a fully automatic system that operates continuously with virtually no maintenance. The VMT OWS utilizes permanent media - which is self cleaning through the flushing cycle - in a unique, two-pass design to produce effluent with exceptionally low oil levels.
The sep...
|
|
|
Date 2009-04-09 |
|
|
|
|
|
The G4100 NOX/O2 Analyzing System is a practical and direct in-situ gas analyzer for onboard monitoring of NOX concentrations. This analyzer uses a new zirconia sensor technology, which provides a cost-effective solution to fulfill tightening emission regulations as well as to support the most effective operation for both diesel engines and boilers.
The G4100 NOX/O2 Analyzing System is designed ...
|
|
|
Date 2009-04-07 |
|
|
|
|
|
IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel is laid on of after 1st January 2005.
The Rivertrace "Smart-Cell" Bilge Alarm meets the requirements of MEPC 107 (49) for monitoring of 3 oil types: Fuel Oil, Diesel and Emulsions. By utilising...
|
|
|
Date 2009-04-04 |
|
|
|
|
|
Being mindful of the need to offer the so desired uiversal and flexible solution for monitoring of tank levels (cargo, ballast, service), tank and manifold pressures, temperatures, draft, etc. and deliver the information to ship's automation systems, Ariston developed the advanced Multipurpose Monitoring & Control System.
The System features TDU display unit with colour touch screen and configu...
|
|
|
Date 2009-04-04 |
|
|
|
|
|
Evac has designed a new, improved Vacuum Interface Unit which is now ready for delivery. In most cases the new unit is an incomparable alternative to our previous Vacuum Interface Units with 7 and 10 liter grey water tanks. For special cases, however, the previous models will be available also in the future.
There are three significant improvements in the new Interface Unit when compared with th...
|
|
|
Date 2009-03-10 |
|
|
|
|
|
MISSION™ OC is a high performance, combined oil and exhaust gas-fired boiler, with a 0.75-5 t/h capacity of the oil-fired section at 9 bar(g) design pressure.
MISSION™ OC is a vertical, cylindrical boiler with an exhaust gas section consisting of bare smoke
tubes while the oil-fired section features pin tubes in the convection section.
The boiler design has integrated pin tube elements. Th...
|
|
|
Date 2009-03-05 |
|
|
|
|
|
Plate thermal exchanger is composed of multiple corrugated multiple electric heating panels hanging between the upper carrying bar and the underneath guide bar. The electric heating panels make a hole enabling two fluids to be passed through, and the shape of valley formed by the panels changes the How of the fluids into a turbulent flow and acts as a support to the plates against the input differe...
|
|
- 