2RxPRO & 2RxPRO-S DUAL CHANNEL AIS RECEIVERS - Visit us @ METS 2010 SevenStar Electronics
Both units feature industry-leading, pro-quality sensitive digital radio receivers that monitor both AIS channels simultaneously, so you do not miss messages or have to wait for the data to be eventually received (as is the case with all single channel AND switched single channel receivers.) No setup is required - just install a suitable VHF antenna (or use an existing one with the -S), 9-28v power (only 1watt consumption at 12v) and connect to your PC or plotter using the USB and NMEA0183 outputs.
And if you are running out of NMEA ports, the 2RxPRO & 2RxPRO-S can also take in a NMEA feed at 4800 baud from your GPS or other instrument, and multiplex the data in with the AIS data going off to your plotter - so you don't even need another NMEA port to install it!
Receives on both AIS channels ALL THE TIME!
The 2RxPRO features a very robust, professional-grade water-resistant metal case, and integral power and NMEA cables to make installation as easy as it gets!
Features the same excellent sensitivity as our professional grade, fully-approved AIS transponders
Built-in antenna splitter (-S version only)
Built-in mux to combine NMEA data from another instrument
Built in USB port as well as NMEA 0183
Works with 12 or 24 volt systems
06 December 2010
